6 Cable connectors + 2 terminals for Gardena R50Li R70Li R75Li - Original 3m
* Incl. VAT excl. Shipping
6x cable connector Wire connectors (blue) and 2x plug -in terminals (red)- original Scotchlok 314 and 951 from 3m®
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all Gardena Lawnmower models: R50Li R70Li R75Li,...
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending on the damage, if necessary must be used in addition to a piece of cable or the cable guide can be changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
6x cable connector Wire connectors (blue) and 2x plug -in terminals (red)- original Scotchlok 314 and 951 from 3m®
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all Gardena ® Lawnmower models: R50Li R70Li R75Li,...
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending on the damage, if necessary must be used in addition to a piece of cable or the cable guide can be changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
| Item ID | 31962 |
| Condition | New |
| Age rating | No age restriction |
| Model | V3M-Ga-314x6+951x2-b |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 10 piece |
| Weight | 51 g |
| Net weight | 60 g |
| Dimensions | 0×0×0 mm |
