15 Cable connectors + 5 terminals for Worx Landroid WR101-WR113 - Re-sealable Box - Original 3m
* Incl. VAT excl. Shipping
15x cable connector Wire connectors (blue) and 5x connection terminals (red)- original Scotchlok 314 and 951 of 3m® in the re Clos able storage Box
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all Worx® Landroid ® models: WR101, WR101SI, WR102SI, WR104SI, WR105SI, WR106SI, WR110MI, WR111MI, WR113MI,...
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending onDamage must be if necessary. Additionally a piece of cable is used or the cable guidance is changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
15x cable connector Wire connectors (blue) and 5x connection terminals (red)- original Scotchlok 314 and 951 of 3m® in the re Clos able storage Box
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all Worx® Landroid ® models: WR101, WR101SI, WR102SI, WR104SI, WR105SI, WR106SI, WR110MI, WR111MI, WR113MI,...
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending onDamage must be if necessary. Additionally a piece of cable is used or the cable guidance is changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
| Item ID | 31918 |
| Condition | New |
| Age rating | No age restriction |
| Model | V3M-Wo-314x15+951x5_BOX |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 10 piece |
| Weight | 75 g |
| Net weight | 65 g |
| Dimensions | 90×80×20 mm |
