6 Cable connectors + 2 terminals for al-Ko Robolinho 4000 4100 solo - Original 3m
* Incl. VAT excl. Shipping
6x cable connector Wire connectors (blue) and 2x connection terminals (red)- original Scotchlok 314 and 951 from 3m®
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all al-ko®-Lawnmower models: Robolinho 4000, Robolinho 4100 solo, Robolinho 4000 solo
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending onDamage must be if necessary. Additionally a piece of cable is used or the cable guidance is changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
6x cable connector Wire connectors (blue) and 2x connection terminals (red)- original Scotchlok 314 and 951 from 3m®
- Repair Connection of a cut wire/installation of the search cable/connection of the cable to the charging station
- no isolation of the cable necessary due to the proven U-Contact principle
- With gel filling (314): Waterproof , moisture resistant , weather resistant
- For all al-ko®-Lawnmower models: Robolinho 4000, Robolinho 4100 solo, Robolinho 4000 solo
The two cable ends of the cut-out cable must be pushed into the connector all the way to the end .
The 3rd hole can be released or is available for a search cable (depending on the model-please check with the lawnmower manufacturer).
Depending onDamage must be if necessary. Additionally a piece of cable is used or the cable guidance is changed slightly.
Then the blue part must be completely pressed in (the simplest way with a combination pliers) in order to ensure a permanent connection.
To connect to the charging station, place the end of the cable in the U-contact of the terminal and press together. (depending on the model-please check with the lawnmower manufacturer)
The same cable connectors are also sold by Husqvarna/Gardena for their Rasenmäherroboter (article-No.: 501980201).
Manufacturer's Specifications:
- temperature, operating max.: 140 °c
- temperature, operating min.:-40 °c
- Max diameter wire: 3, 94mm
- Rated current 15a
- Up to 600 V
Item ID | 31914 |
Condition | New |
Age rating | No age restriction |
Model | V3M-AK-314x6+951x2-c |
Manufacturer | Genisys |
Manufacturing country | Germany |
Content | 10 piece |
Weight | 51 g |
Net weight | 60 g |
Dimensions | 90×80×20 mm |